Troubleshooting general issues on Compute Instances
This guide provides common troubleshooting scenarios you may encounter when managing your Compute Instance. Each troubleshooting section provides ways to further diagnose your issue and the corresponding steps, when applicable, to resolve the issue. We recommend using this guide in the following way:
-
Browse the guide's headings and select the issue that best describes your problem.
-
Follow the troubleshooting steps in the order they are presented.
-
Once you've confirmed a specific problem, try fixing it with the suggested solutions.
If the troubleshooting steps in this guide don't apply to your issue, review these additional troubleshooting guides that cover other topics:
- Troubleshooting connection issues on Compute Instances
- Troubleshooting SSH on Compute Instances
- Troubleshooting memory issues on Compute Instances
- Troubleshooting firewall issues on Compute Instances
- Troubleshooting web servers, databases, and other services
Additional resources for help
This guide explains how to use different troubleshooting commands on your Compute Instance. These commands can produce diagnostic information and logs that may expose the root of your connection issues. For some specific examples of diagnostic information, this guide also explains the corresponding cause of the issue and presents solutions for it.
If the information and logs you gather do not match a solution outlined here, consider searching the Community Site for posts that match your system's symptoms. Or, post a new question in the Community Site and include your commands' output.
We are not responsible for the configuration or installation of software on your Compute Instance. Refer to our scope of support for a description of the issues with which Support can help.
Compute Instance is unresponsive
If your Compute Instance is unresponsive, either at the Lish console or to basic network requests, read through the Troubleshooting basic connection issues on Compute Instances guide.
Compute Instance is slow
You should follow all steps in the Troubleshooting basic connection issues on Compute Instances guide before using the checklist in this section.
Is the disk full?
If your Compute Instance's disk is full, this can cause performance degradation and instability for your applications. Use the following command to determine the free space on your Compute Instance's filesystem:
df -h
The output will resemble the following example:
Filesystem Size Used Avail Use% Mounted on
/dev/root 189G 166G 14G 93% /
devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs 3.9G 16K 3.9G 1% /dev/shm
tmpfs 3.9G 399M 3.6G 10% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs 799M 0 799M 0% /run/user/1000
In the example output, you can see that the root filesystem is 93% full. Issue the following command to list all files over 200MB on your root filesystem:
sudo find / -xdev -type f -size +200M -exec ls -lah {} \;
You can adjust the +200M
value in this command, as needed, to search for files above a specific size.
Deleted files
If a service deletes a file that it is no longer needed, the file remains on your disk until the next time the service has been rebooted. The following example demonstrates how deleted files belonging to Apache can continue to take up space after they have been deleted.
Use the following command to check for deleted files that are currently open:
sudo lsof | grep deleted | numfmt --field=8 --to=iec
This command will check the output of lsof
for files marked as deleted, and will convert the file sizes so that they're more easily readable. In this example Apache is holding on to several old files:
apache2 32341 www-data 13u REG 8,0 0 24K /tmp/.ZendSem.OmCTIC (deleted)
apache2 32341 www-data 14w REG 0,19 0 243M /run/lock/apache2/proxy.13748 (deleted)
apache2 32341 www-data 15w REG 0,19 0 243M /run/lock/apache2/mpm-accept.13748 (deleted)
apache2 32342 www-data 12w REG 0,19 0 158M /run/lock/apache2/ssl-cache.13747 (deleted)
apache2 32342 www-data 13u REG 8,0 0 24K /tmp/.ZendSem.OmCTIC (deleted)
apache2 32342 www-data 14w REG 0,19 0 243M /run/lock/apache2/proxy.13748 (deleted)
apache2 32342 www-data 15wW REG 0,19 0 243M /run/lock/apache2/mpm-accept.13748 (deleted)
apache2 32343 www-data 12w REG 0,19 0 158M /run/lock/apache2/ssl-cache.13747 (deleted)
To free up this space, you can simply restart the Apache service on your Compute Instance. This command restarts the Apache service using systemd on Ubuntu 18.04:
sudo systemd restart apache2
Is the Compute Instance out of memory?
The applications on your Compute Instance require a certain amount of physical memory to function correctly. If all of the available physical memory is consumed, your system could slow down, display out of memory errors, or become unresponsive. Here's how to tell if your Compute Instance is out of memory:
- Log in to Cloud Manager.
- Click the Linodes link in the sidebar to view a list of all your Compute Instance.
- Select a Compute Instance to view its dashboard.
- Click on the Launch Console link in the upper-right hand corner to launch the LISH Console. The LISH console window appears. If memory errors are displayed in the LISH console, stop some running services to free up memory or upgrade to a larger plan.
- Read through the Troubleshooting memory issues on Compute Instances guide for troubleshooting commands which display your memory use.
- If an application is consuming all of your available memory, you have three options. You can kill the application, change the application's settings to reduce its memory footprint, or upgrade your Compute Instance to a larger plan.
If your Compute Instance is not out of memory, continue to the next section.
Is there a disk I/O bottleneck?
Disk input/output (I/O) bottlenecks can occur when an application or service is reading or writing an excessive amount of information to disk and the processor has to wait to process the information. High I/O wait can significantly slow down your server. To determine if your server currently has an I/O bottleneck, follow the steps below:
-
Enter
top
to access thetop
monitoring utility. The screen shown below appears. -
Examine the I/O wait percentage, as shown above. If the number is zero, your server does not currently have a bottleneck.
-
If your I/O wait percentage is above zero, verify that your server has enough free memory available. In many cases, high I/O is an indication that your server has started "swapping," or using disk space as memory.
-
If your server has free memory available and is not using swap space, use
iotop
or vmstat to find the application responsible for the excessive I/O. Databases are often a source of excessive I/O. You may need to stop and/or reconfigure the application.You must run
iotop
asroot
or withsudo
. -
If you cannot determine the source of the IO bottleneck, contact Support for assistance.
Since top
only reports what is currently happening, and most I/O issues are temporary, it helps to have a monitoring utility set up so you can see a graph of I/O trends and spot potential issues before they become major problems. See the server monitoring guides for instructions on setting up a server monitoring utility.
Website is not loading
If your website is unresponsive or not loading correctly, see Troubleshooting web servers, databases, and other services.
You should follow all steps Compute Instance is slow section before following the recommendations in Troubleshooting web servers, databases, and other services.
Can't connect via SSH or FTP
If you can't connect to your Compute Instance over SSH, see Troubleshooting SSH on Compute Instances guide.
You should follow all steps in the Compute Instance is slow section before following the Troubleshooting SSH guide.
Are you using Telnet or FTP?
Telnet and FTP are disabled on your Compute Instance by default, and we strongly recommend that you do not use those protocols. Instead, please use Secure Shell (SSH) and SSH File Transfer Protocol (SFTP) -- the secure versions of the Telnet and FTP protocols. All Compute Instances come with an SSH server enabled, and you can connect to port 22 with SSH and SFTP clients. For more information, see Set up and secure a Compute Instance.
Forgot my username or password
System user/root password
If you've forgotten the password for the root user on your Compute Instance, you can follow the steps for resetting your root password from Cloud Manager.
Once you have access to your Compute Instance as the root user, you can reset the password for any additional system users with the passwd
command. The example resets the password for the username
user:
passwd username
Cloud Manager user
-
If you forget your Cloud Manager username, you can confirm it by supplying your email address on the Recover Username page.
-
Assuming you know your Cloud Manager username, but you've forgotten the password, you can retrieve it on the Reset Password page.
If you've followed these steps, but you're still having trouble accessing your account, please contact Support.
Cloud Manager is displaying "incorrect" information
Use the following checklist if Cloud Manager is displaying "incorrect" information.
Did you recently change your account?
If you recently created a new account, resized an existing Compute Instance, or added extra bandwidth, the bandwidth displayed in Cloud Manager will be prorated for the amount of time left in the current billing cycle. For example, if you create an account on the 15th day of the month, the Manager will indicate that your account has been allocated half of the plan's bandwidth for the current month. This information is an accurate representation of the bandwidth available for the rest of the billing period. When then next billing period starts, the Manager will indicate that all of the plan's bandwidth is available. View the Billing guide for more information.
Did you add additional storage?
If you recently upgraded your plan, your Compute Instance won't be able to take advantage of the additional space until you resize the disk. You can use Cloud Manager to verify if there's additional storage space available for disks:
-
Log in to Cloud Manager.
-
Click the Linodes link in the sidebar to view a list of your Compute Instances.
-
Select a Compute Instance and the Storage tab.
-
Compare the total available disk space with the Size Column in the Disks table. If you have free storage space, you can allocate that space to your existing disks, or create new disks as needed.
Follow our steps for resizing a disk to take advantage of the extra space.
Updated 4 days ago