Network List

Create, update, or deactivate a network list. To deactivate a network list, pass the list argument empty with a mode of REMOVE.

resource "akamai_networklist_network_list" "my_network_list" {
 name        = "My network list"
 type        = "IP"
 description = "My new IP network list"
 list        = ["123.45.678.901", "234.56.789.012", "345.67.890.123"]
 mode        = "APPEND"
}

my_network_lists = {
  "contract_id"     = "C-0N7RAC7"
  "description"     = "My new IP network list"
  "group_id"        = 12345
  "id"              = "123456_MYNETWORKLIST"
  "list"            = ["123.45.678.901", "234.56.789.012", "345.67.890.123"]
  "mode"            = "APPEND"
  "name"            = "My network list"
  "network_list_id" = "123456_MYNETWORKLIST"
  "sync_point"      = 0
  "type"            = "IP"
  "uniqueid"        = "123456_MYNETWORKLIST"
}

Arguments

Pass all required arguments to create or update your network list.

Argument	Required	Description
`name`	✔️	Your network list's name.
`type`	✔️	Your network list's type. One of: `IP`. IPv4 and/or IPv6 addresses or CIDRs. Entry limit is 50,000. `GEO`. Request's country of origin. Entry limit is 275.
`description`	✔️	Additional information about the network list.
`mode`	✔️	The action to take upon apply. One of `APPEND`, `REPLACE`, or `REMOVE`. Initial creation uses `APPEND`.
`list`		A list of IP addresses or locations to include, add, or remove from an existing list. To deactivate a network list, pass the an empty list, `[]` with a `mode` of `REMOVE`.
`contract_id`		Your contract ID.
`group_id`		Your group ID.

Attribute

There's no default standard output. Upon apply, your network list's ID appears in the last line of the process log.

Adding an output block returns basic information about your network list.

akamai_networklist_network_list.my_network_list: Creation complete after 3s [id=123456_MYNETWORKLIST]

Attribute	Description
`contract_id`	Your contract ID.
`description`	Additional information about the network list.
`group_id`	Your group ID.
`id`	The network list ID.
`mode`	The action taken on apply. One of `APPEND`, `REPLACE`, or `REMOVE`.
`name`	Your network list's name.
`network_list_id`	The network list ID.
`sync_point`	The network list version. The value automatically increments with each modification.
`type`	Your network list's type. Either `IP` or `GEO`.
`uniqueid`	The network list ID.