---
updatedAt: 2026-03-01T17:56:30.000Z
agentTools:
  siteIndex: https://techdocs.akamai.com/llms.txt
  projectIndex: https://techdocs.akamai.com/zero-trust-client/llms.txt
---

# Install SIA Proxy MITM certificate

If ​SIA​ Proxy is enabled, you need to distribute the trusted man-in-the-middle (MITM) root certificate authority (CA) certificate that you generated in ​SIA​ (​ZTC certificate) to mobile devices in your network.

> 📘
>
> If you activated a subordinate certificate to ​SIA​ (non-​​Akamai​ certificate), certificate distribution is only necessary if the devices in your network are not already configured with the root certificate.

# Before you begin

[Create a SIA Proxy MITM certificate](https://techdocs.akamai.com/etp/docs/create-mitm-certificate)

# Android

Follow these steps to install the certificate on an Android device.

1. [Download your certificate](https://techdocs.akamai.com/etp/docs/manage-certificate#download-a-certificate).
2. Transfer the .pem certificate to the mobile device.
3. On your mobile device, go to **Settings** > **Security** > **Encryption** **& credentials** > **Install a certificate**

> 📘
>
> Depending on your device, this setting may be located elsewhere. Refer to your device’s manual. You can also use the Settings app’s search feature. Type `Certificate` and look for `CA Certificate`.

4. Tap **CA Certificate**.
5. You may see a warning about security risks - this is normal when installing certificates.
6. Locate and select your .pem file.
7. Follow the prompts to complete installation.
8. You may need to enter your device PIN or password to proceed.
9. After the process is complete, restart the ​Zero Trust Client​ app.

# iOS and iPadOS

Follow these steps to install the certificate on an iPhone or iPad.

1. [Download your certificate](https://techdocs.akamai.com/etp/docs/manage-certificate#download-a-certificate).
2. Transfer the .pem certificate to the iPhone.
3. On the iPhone, open the **Files** app and tap the .pem certificate.\
   A Profile Downloaded notification appears. Tap **Close**.
4. Go to **Settings**.
5. At the top, tap **Profile Downloaded**.
6. Check if the certificate name and details are correct and tap **Install**.
7. Enter your passcode.
8. Tap **Install** to confirm.
9. Tap **Install** again in the popup to continue.
10. The certificate is now installed. Tap **Done**.
11. Go back to Settings and tap **About**.
12. Scroll down to the bottom and tap **Certificate Trust Settings**.
13. Find your CA certificate and enable full trust for the root certificate.
14. In the confirmation popup, tap **Continue**.
15. Restart the ​Zero Trust Client​ app.

# Sibling pages

* [Configure the mobile client](https://techdocs.akamai.com/zero-trust-client/docs/configure-zero-trust-client-mobile.md)