--- updatedAt: 2026-05-21T09:54:05.000Z agentTools: siteIndex: https://techdocs.akamai.com/llms.txt projectIndex: https://techdocs.akamai.com/property-mgr/llms.txt --- # Enhanced Proxy Detection with GeoGuard Enhanced Proxy Detection (EPD) leverages the GeoGuard service provided by GeoComply to add proxy detection and location spoofing protection. It identifies requests for your content that have been redirected from an unwanted source via a proxy. You can then allow, deny, or redirect these requests. Using this behavior enables the Show My IP feature by default. This feature allows you to identify the client machine that makes a request to the /geoguard/show-my-ip endpoint using an EPD enabled hostname. AK\_CLIENT\_IP we use can be a proxy or a non-proxy client. # Use Best Practices mode (recommended) Once you've enabled this behavior, you need to set the Configuration Mode. ​Akamai​ recommends **Best Practices**. Select it to automatically apply the primary categories that GeoGuard identifies as essential for proxy detection.

GeoComply maintains a fixed list of [categories](https://www.geocomply.com/akamai-customer-guide/?ref=akamai) for their GeoGuard service. This includes multiple primary, must-have categories for proxy detection. The Enhanced Proxy Detection with GeoGuard behavior leverages these categories to recognize that a request is coming from a proxy. ## How Best Practices mode is applied This mode automatically incorporates all of the GeoGuard service's must-have categories. You define an action to be taken when a request is identified from any of these categories: * **Allow.** This lets the request through, and the action is logged. You can later audit the logs to determine how setting this to a different action may affect your traffic. * **Deny.** This blocks all matching requests. * **Redirect.** This sends these requests to an alternate URL that you define.

> 📘 > > A Redirect URL can't exceed 2,000 characters in length. Use an absolute URL and ensure that it doesn’t include the same hostname, to avoid creating a redirect loop. # Use Advanced mode Set this as your Configuration Mode if you're looking to customize GeoGuard categories individually to meet your specific needs.

GeoComply maintains a fixed list of [categories](https://www.geocomply.com/akamai-customer-guide/?ref=akamai) for their GeoGuard service. This includes multiple, primary ("must-have") categories for proxy detection. The Enhanced Proxy Detection with GeoGuard behavior leverages these categories to recognize that a request is coming from a proxy. > 🚧 > > To ensure basic protection, make sure that all of GeoGuard's must-have categories are **On**. If you don't, ​Akamai​ can't promise proper proxy detection protection. ## How Advanced mode is applied For the proxy detection categories you enable, you can define an action to be taken when a request is identified from any of these categories: * **Allow.** This lets the request through, and the action is logged. You can later audit the logs to determine how setting this to a different action may affect your traffic. * **Deny.** This blocks all requests from that category. * **Redirect.** This sends requests from that category to an alternate URL that you define.

> 📘 > > A Redirect URL can't exceed 2,000 characters in length. Use an absolute URL and ensure that it doesn’t include the same hostname, to avoid creating a redirect loop. Requests from categories that are left at **Off** are processed as normal: they're allowed without logging. ## Use case: Different actions for each category We recommend that you stick with the [Best Practices](https://techdocs.akamai.com/property-mgr/docs/enhanced-proxy-detn-geoguard#use-best-practices-mode-recommended) mode for ease of use, and to offer the best overall proxy detection. However, Best Practices require that you use a single action for requests coming from all GeoComply categories. If you need to apply a different action type for the various categories, select **Advanced** mode and: 1. Enable them all. 2. Apply the appropriate action for each. This way, all GeoComply must-have categories have proxy detection enabled, similar to what’s offered with the Best Practices mode. # Allow specific IP addresses Do you have selected IP addresses that you want to allow, even though EPD positively identifies a proxy? This is called *allow-listing*. If you do, talk to your ​Akamai​ account team to escalate a false positive result with EPD. They'll work with you to either: * **Contact GeoComply.** Your account team will alert them to a false positive result for a specific IP address or CIDR block. * **Push a metadata feature override.** Your account team will push a metadata update to override a false positive at the platform level. # Add Forward Header Enrichment (optional) You can also include a header that tells you if a connecting IP address in a request is associated with an anonymous proxy. This can be especially helpful if you need to check the requester before providing access to your content. It’s implemented in one of two ways, and both methods are supported for use with the [Best Practices](https://techdocs.akamai.com/property-mgr/docs/enhanced-proxy-detn-geoguard#use-best-practices-mode-recommended) and [Advanced](https://techdocs.akamai.com/property-mgr/docs/enhanced-proxy-detn-geoguard#use-advanced-mode) modes for EPD. ## Method 1: Enable it directly in the behavior Here, you add the Enhanced Proxy Detection with GeoGuard behavior to a rule in your property and set Enable Forward Header Enrichment to **On**. The header is sent along with all requests that meet the match criteria for that rule. For example, if you include the behavior in the Default Rule, that rule applies to all requests. So, the header will be sent along with all requests coming from proxies. This is the approach you want to take if you have other rules in your configuration that use a behavior to block access. For example, if you're using [Content Targeting - Protection](https://techdocs.akamai.com/adaptive-media-delivery/docs/add-content-tgting-prot) with Adaptive Media Delivery, you'd apply EPD as a higher priority (lower in the rule list), to have all Enhanced Proxy Detection settings applied. ## Method 2: Add a separate behavior With this method, you add and enable the [Enhanced Proxy Detection with GeoGuard - Forward Header Enrichment behavior](https://techdocs.akamai.com/property-mgr/docs/forward-header-enrichment) to a separate rule. This lets you better control how the header is applied. You add this behavior to a separate rule and use a unique match criteria. Only requests that meet that match criteria will include the header. This method also requires that you include the Enhanced Proxy Protection with GeoGuard behavior in your property. These points also apply: * **The behaviors need to exist in different rules.** This behavior only applies if you want to use a different match criteria to include the header after a request. If you want the match criteria to be the same for both, just use Method 1. * **Ensure the **Enable Forward Header Enrichment** option is disabled.** * **If you’re using other access blocking protections, such as [Content Targeting - Protection](https://techdocs.akamai.com/property-mgr/docs/content-tgting-prot-amd), you may not want to use Method 1, instead.** Otherwise, ensure that both rules you need for this method are higher in priority (lower in the rule list). ## About the header The `Akamai-EPD` header contains the following information: ``` Akamai-EPD: ``` The feature leverages GeoGuard's *must-have* and *optional* [categories](https://www.geocomply.com/akamai-customer-guide/?ref=akamai) to identify and label requests in the header as two-letter or three-letter code:
Akamai EPD Letter Code GeoGuard Category
`av` is_anonymous_vpn
`pp` is_public_proxy
`dp` is_smart_dns_proxy
`tn` is_tor_exit_node
`vc` is_vpn_datacenter
`hp` is_hosting_provider
`rp` is_residential_proxy
`rlp` is_relay_proxy
`pv` is_proxy_over_vpn
So, for a Smart DNS Proxy running in a public cloud, you'd see: ``` Akamai-EPD: hp dp ``` # Sibling pages * [Ad Scaler Circuit Breaker](https://techdocs.akamai.com/property-mgr/docs/ad-scaler-circuit-breaker.md) * [Adaptive Acceleration](https://techdocs.akamai.com/property-mgr/docs/adaptive-accel.md) * [Adaptive Image Compression](https://techdocs.akamai.com/property-mgr/docs/adaptive-img-comp-aic.md) * [Advanced](https://techdocs.akamai.com/property-mgr/docs/adv-beh.md) * [Aggregated Reporting](https://techdocs.akamai.com/property-mgr/docs/aggd-rpt.md) * [Akamai API Gateway](https://techdocs.akamai.com/property-mgr/docs/akamai-api-gateway.md) * [Akamai Instant](https://techdocs.akamai.com/property-mgr/docs/akamai-instant.md) * [Akamai Mobile Protocol](https://techdocs.akamai.com/property-mgr/docs/akamai-mobile-protocol.md) * [Akamai Provider for Salesforce Commerce Cloud](https://techdocs.akamai.com/property-mgr/docs/akamai-provider-salesforce-commerce-cloud.md) * [Akamai Provider for Salesforce Commerce Cloud Host Header Control](https://techdocs.akamai.com/property-mgr/docs/akamai-provider-salesforce-commerce-cloud-host-header-control.md) * [Akamaize Tag](https://techdocs.akamai.com/property-mgr/docs/akamaize-tag.md) * [Akamaizer](https://techdocs.akamai.com/property-mgr/docs/akamaizer.md) * [Allow All Methods on Parent Servers](https://techdocs.akamai.com/property-mgr/docs/allow-methods-parent-servers.md) * [Allow Caching on Commercial Network](https://techdocs.akamai.com/property-mgr/docs/allow-caching-on-commercial-network.md) * [Allow Conditional Origins](https://techdocs.akamai.com/property-mgr/docs/conditional-origins.md) * [Allow DELETE](https://techdocs.akamai.com/property-mgr/docs/allow-delete.md) * [Allow OPTIONS](https://techdocs.akamai.com/property-mgr/docs/allow-options.md) * [Allow PATCH](https://techdocs.akamai.com/property-mgr/docs/allow-patch.md) * [Allow POST](https://techdocs.akamai.com/property-mgr/docs/allow-post.md) * [Allow PUT](https://techdocs.akamai.com/property-mgr/docs/allow-put.md) * [Alt-Svc Header](https://techdocs.akamai.com/property-mgr/docs/alt-svc-header.md) * [API Prioritization Cloudlet](https://techdocs.akamai.com/property-mgr/docs/api-prioritization-cloudlet.md) * [Application Load Balancer Cloudlet](https://techdocs.akamai.com/property-mgr/docs/app-load-balancer-cloudlet.md) * [Audience Segmentation Cloudlet](https://techdocs.akamai.com/property-mgr/docs/audience-segmentation-cloudlet.md) * [Auth Token 2.0 Verification](https://techdocs.akamai.com/property-mgr/docs/auth-token-2-0-ver.md) * [Auto Domain Validation](https://techdocs.akamai.com/property-mgr/docs/auto-domain-val.md) * [Bit Rate Limiting](https://techdocs.akamai.com/property-mgr/docs/bit-rate-limiting.md) * [Breadcrumbs](https://techdocs.akamai.com/property-mgr/docs/breadcrumbs-amd.md) * [Break Forward Connection](https://techdocs.akamai.com/property-mgr/docs/break-forward-connection.md) * [Brotli Support](https://techdocs.akamai.com/property-mgr/docs/brotli-support.md) * [Cache HTTP Error Responses](https://techdocs.akamai.com/property-mgr/docs/cache-http-err-responses.md) * [Cache HTTP Temporary Redirects](https://techdocs.akamai.com/property-mgr/docs/cache-http-redirects.md) * [Cache ID Modification](https://techdocs.akamai.com/property-mgr/docs/cache-id-modification.md) * [Cache Key Path Rewrite](https://techdocs.akamai.com/property-mgr/docs/cache-key-path-rewrite.md) * [Cache Key Query Parameters](https://techdocs.akamai.com/property-mgr/docs/cache-key-query-param.md) * [Cache POST Responses](https://techdocs.akamai.com/property-mgr/docs/cache-post-responses.md) * [Cache Prefreshing](https://techdocs.akamai.com/property-mgr/docs/cache-prefresh-refresh.md) * [Cache Tag](https://techdocs.akamai.com/property-mgr/docs/cache-tag.md) * [Cache Tag Visibility](https://techdocs.akamai.com/property-mgr/docs/cache-tag-visibility.md) * [Caching](https://techdocs.akamai.com/property-mgr/docs/caching-2.md) * [Centralized Authorization](https://techdocs.akamai.com/property-mgr/docs/centralized-authz.md) * [Chase Redirects](https://techdocs.akamai.com/property-mgr/docs/chase-redirects.md) * [Chunked Transfer Encoding](https://techdocs.akamai.com/property-mgr/docs/chunked-transfer-encoding.md) * [Client Certificate Authentication](https://techdocs.akamai.com/property-mgr/docs/client-certificate-authentication.md) * [Client Characteristics](https://techdocs.akamai.com/property-mgr/docs/client-charac.md) * [Cloud Interconnects for Microsoft Azure](https://techdocs.akamai.com/property-mgr/docs/cloud-interconnects-azure.md) * [Cloud Interconnects for Google Cloud](https://techdocs.akamai.com/property-mgr/docs/cloud-interconnects-google-cloud-gcp.md) * [Cloud Monitor Data Delivery](https://techdocs.akamai.com/property-mgr/docs/cloud-monitor-data-deliv.md) * [Cloud Monitor Instrumentation](https://techdocs.akamai.com/property-mgr/docs/cloud-monitor-instrumentation.md) * [Cloud Wrapper](https://techdocs.akamai.com/property-mgr/docs/cloud-wrapper.md) * [Cloud Wrapper Advanced](https://techdocs.akamai.com/property-mgr/docs/cloud-wrapper-adv.md) * [Common Media Client Data support](https://techdocs.akamai.com/property-mgr/docs/common-media-client-data-support.md) * [Connect Timeout](https://techdocs.akamai.com/property-mgr/docs/connect-timeout.md) * [Construct Response](https://techdocs.akamai.com/property-mgr/docs/construct-response.md) * [Content Characteristics](https://techdocs.akamai.com/property-mgr/docs/content-charac.md) * [Content Characteristics - Dynamic Web Content](https://techdocs.akamai.com/property-mgr/docs/content-charac-dynamic-web-content.md) * [Content Characteristics - Large File](https://techdocs.akamai.com/property-mgr/docs/content-charac-large-file.md) * [Content Characteristics - Streaming Video Live](https://techdocs.akamai.com/property-mgr/docs/content-charact-streaming-video-live.md) * [Content Characteristics - Streaming Video On-demand](https://techdocs.akamai.com/property-mgr/docs/content-charac-streaming-video-on-demand.md) * [Content Provider Code](https://techdocs.akamai.com/property-mgr/docs/content-provider-code-beh.md) * [Content Targeting (EdgeScape)](https://techdocs.akamai.com/property-mgr/docs/content-tgting.md) * [Content Targeting - Protection](https://techdocs.akamai.com/property-mgr/docs/content-tgting-prot-amd.md) * [Control Access](https://techdocs.akamai.com/property-mgr/docs/control-access.md) * [Cookie Authorization](https://techdocs.akamai.com/property-mgr/docs/cookie-authz.md) * [CORS Protocol Support](https://techdocs.akamai.com/property-mgr/docs/cors-protocol-support.md) * [Custom Behavior](https://techdocs.akamai.com/property-mgr/docs/custom-behavior.md) * [DataStream](https://techdocs.akamai.com/property-mgr/docs/datastream-beh.md) * [Device Characterization - Define Cached Content](https://techdocs.akamai.com/property-mgr/docs/device-characterization-dc.md) * [Device Characterization - Forward in Header](https://techdocs.akamai.com/property-mgr/docs/device-characterization-forward-in-header.md) * [Diagnostic Data Beacons](https://techdocs.akamai.com/property-mgr/docs/diagnostic-data-beacons.md) * [DNS Asynchronous Prefresh](https://techdocs.akamai.com/property-mgr/docs/dns-asynchronous-prefresh.md) * [DNS Asynchronous Refresh](https://techdocs.akamai.com/property-mgr/docs/dns-asynchronous-refresh.md) * [Download Complete Marker](https://techdocs.akamai.com/property-mgr/docs/dl-complete-marker.md) * [Downstream Cacheability](https://techdocs.akamai.com/property-mgr/docs/downstream-cacheability.md) * [Dynamic Page Caching](https://techdocs.akamai.com/property-mgr/docs/dynamic-page-caching.md) * [Early Data (0-RTT)](https://techdocs.akamai.com/property-mgr/docs/early-data-0rtt.md) * [Early Data (0-RTT) Advanced](https://techdocs.akamai.com/property-mgr/docs/early-data-0rtt-advanced.md) * [Early Hints](https://techdocs.akamai.com/property-mgr/docs/early-hints.md) * [Edge Load Balancing: Advanced Metadata](https://techdocs.akamai.com/property-mgr/docs/edge-load-balancing.md) * [Edge Load Balancing: Data Center](https://techdocs.akamai.com/property-mgr/docs/edge-load-balancing-data-center.md) * [Edge Load Balancing: Origin Definition](https://techdocs.akamai.com/property-mgr/docs/edge-load-balancing-origin-definition.md) * [Edge Redirector Cloudlet](https://techdocs.akamai.com/property-mgr/docs/edge-redirector-cloudlet.md) * [Edge Server Identification](https://techdocs.akamai.com/property-mgr/docs/edge-server-identification.md) * [EdgeWorkers](https://techdocs.akamai.com/property-mgr/docs/edgeworkers-beh.md) * [Enforce mTLS settings](https://techdocs.akamai.com/property-mgr/docs/enforce-mtls-settings.md) * [Enhanced Debug](https://techdocs.akamai.com/property-mgr/docs/enhanced-debug.md) * [Enhanced Akamai Protocol](https://techdocs.akamai.com/property-mgr/docs/enhanced-akamai-protocol.md) * [ESI (Edge Side Includes)](https://techdocs.akamai.com/property-mgr/docs/esi-edge-side-includes.md) * [Fast Invalidate](https://techdocs.akamai.com/property-mgr/docs/fast-inval.md) * [FIPS mode - origin](https://techdocs.akamai.com/property-mgr/docs/fips-mode-origin.md) * [Forward Header Enrichment](https://techdocs.akamai.com/property-mgr/docs/forward-header-enrichment.md) * [Forward Rewrite Cloudlet](https://techdocs.akamai.com/property-mgr/docs/forward-rewrite-cloudlet.md) * [Global Request Number](https://techdocs.akamai.com/property-mgr/docs/global-req-number.md) * [Google Tag Gateway](https://techdocs.akamai.com/property-mgr/docs/google-tag-gateway.md) * [GraphQL Caching](https://techdocs.akamai.com/property-mgr/docs/graphql-caching.md) * [gRPC](https://techdocs.akamai.com/property-mgr/docs/google-rpc.md) * [HD Data Override: Advanced Metadata](https://techdocs.akamai.com/property-mgr/docs/hd-data-override-advanced-metadata.md) * [HSAF for Edge IP Binding](https://techdocs.akamai.com/property-mgr/docs/hsaf-edge-ip-binding.md) * [HTTP Strict Transport Security (HSTS)](https://techdocs.akamai.com/property-mgr/docs/http-strict-transport-security-hsts.md) * [HTTP to HTTPS Upgrade](https://techdocs.akamai.com/property-mgr/docs/http-https-upgrade.md) * [HTTP/2](https://techdocs.akamai.com/property-mgr/docs/http2-support.md) * [HTTP/3](https://techdocs.akamai.com/property-mgr/docs/http3-support.md) * [HTTPS Cache Key Sharing](https://techdocs.akamai.com/property-mgr/docs/https-cache-key-sharing.md) * [IBM Tealeaf Connector](https://techdocs.akamai.com/property-mgr/docs/ibm-tealeaf-conn.md) * [Ignore Case In Cache Key](https://techdocs.akamai.com/property-mgr/docs/ignore-case-cache-key.md) * [Image and Video Manager (Images)](https://techdocs.akamai.com/property-mgr/docs/img-video-manager-img.md) * [Image and Video Manager (Videos)](https://techdocs.akamai.com/property-mgr/docs/img-video-manager-videos.md) * [Image and Video Manager: Set Parameter](https://techdocs.akamai.com/property-mgr/docs/img-video-manager-set-param.md) * [Image Converter Settings](https://techdocs.akamai.com/property-mgr/docs/img-converter-settings.md) * [Inject Reference ID](https://techdocs.akamai.com/property-mgr/docs/inject-reference-id.md) * [InstantConfig](https://techdocs.akamai.com/property-mgr/docs/instantconfig-beh.md) * [Large File Optimization](https://techdocs.akamai.com/property-mgr/docs/large-file-optimization-lfo.md) * [Large File Optimization Advanced](https://techdocs.akamai.com/property-mgr/docs/large-file-optimization-advanced.md) * [Last Mile Acceleration](https://techdocs.akamai.com/property-mgr/docs/last-mile-accel-gzip-comp.md) * [Legacy Referrer Checking](https://techdocs.akamai.com/property-mgr/docs/legacy-referrer-checking.md) * [Localhost Loopback Protection](https://techdocs.akamai.com/property-mgr/docs/localhost-loopback-protection.md) * [Log Custom Details](https://techdocs.akamai.com/property-mgr/docs/log-custom-details.md) * [Log Request Details](https://techdocs.akamai.com/property-mgr/docs/log-req-details.md) * [Manifest Personalization](https://techdocs.akamai.com/property-mgr/docs/manifest-personalization-amd.md) * [Manifest Rerouting](https://techdocs.akamai.com/property-mgr/docs/manifest-rerouting.md) * [Manual Preconnect](https://techdocs.akamai.com/property-mgr/docs/manual-preconnect.md) * [Manual Server Push](https://techdocs.akamai.com/property-mgr/docs/manual-server-push.md) * [Media Acceleration](https://techdocs.akamai.com/property-mgr/docs/media-accel.md) * [Media Acceleration (QUIC Protocol) Opt-Out](https://techdocs.akamai.com/property-mgr/docs/media-accel-quic-protocol-opt-out.md) * [Media Client](https://techdocs.akamai.com/property-mgr/docs/media-client.md) * [Media File Retrieval Optimization](https://techdocs.akamai.com/property-mgr/docs/media-file-retrieval-optimization.md) * [Media Origin Failover](https://techdocs.akamai.com/property-mgr/docs/media-origin-failover.md) * [Metadata Caching](https://techdocs.akamai.com/property-mgr/docs/metadata-caching.md) * [Mobile App Performance SDK](https://techdocs.akamai.com/property-mgr/docs/mobile-app-perf-sdk.md) * [Mobile Detection and Redirect](https://techdocs.akamai.com/property-mgr/docs/mobile-detn-redirect.md) * [Modify Incoming Request Header](https://techdocs.akamai.com/property-mgr/docs/modify-incoming-req-header.md) * [Modify Incoming Response Header](https://techdocs.akamai.com/property-mgr/docs/modify-incoming-response-header.md) * [Modify Outgoing Request Header](https://techdocs.akamai.com/property-mgr/docs/modify-outgoing-req-header.md) * [Modify Outgoing Request Path](https://techdocs.akamai.com/property-mgr/docs/modify-outgoing-req-path.md) * [Modify Outgoing Response Header](https://techdocs.akamai.com/property-mgr/docs/modify-outgoing-response-header.md) * [Modify Via Header](https://techdocs.akamai.com/property-mgr/docs/modify-via-header.md) * [mPulse](https://techdocs.akamai.com/property-mgr/docs/mpulse-beh.md) * [mTLS Edge Server to Origin](https://techdocs.akamai.com/property-mgr/docs/mtls-origin-keystore.md) * [Network Conditions Header](https://techdocs.akamai.com/property-mgr/docs/network-conditions-header.md) * [Object Caching](https://techdocs.akamai.com/property-mgr/docs/object-caching-od.md) * [Optimize Text Streaming (Beta)](https://techdocs.akamai.com/property-mgr/docs/optimize-text-streaming.md) * [Origin Base Path](https://techdocs.akamai.com/property-mgr/docs/origin-base-path.md) * [Origin Characteristics](https://techdocs.akamai.com/property-mgr/docs/origin-charac.md) * [Origin Failure Recovery Method](https://techdocs.akamai.com/property-mgr/docs/origin-failure-recovery-method.md) * [Origin Failure Recovery Policy](https://techdocs.akamai.com/property-mgr/docs/origin-failure-recovery-policy.md) * [Origin Health Detection](https://techdocs.akamai.com/property-mgr/docs/origin-health-detect.md) * [Origin IP Access Control List](https://techdocs.akamai.com/property-mgr/docs/origin-ip-access-control.md) * [Origin Server](https://techdocs.akamai.com/property-mgr/docs/origin-server.md) * [Permissions-Policy](https://techdocs.akamai.com/property-mgr/docs/permissions-policy.md) * [Persistent Connections: Client to Edge](https://techdocs.akamai.com/property-mgr/docs/persistent-connections-client-to-edge.md) * [Persistent Connections: Edge to Origin](https://techdocs.akamai.com/property-mgr/docs/persistent-connections-edge-to-origin.md) * [Personally Identifiable Information](https://techdocs.akamai.com/property-mgr/docs/personally-identifiable-info-pii.md) * [Phased Release Cloudlet](https://techdocs.akamai.com/property-mgr/docs/phased-release-cloudlet.md) * [Post Quantum Cryptography (PQC) Client to Edge](https://techdocs.akamai.com/property-mgr/docs/pqc-client-to-edge.md) * [Post Quantum Cryptography (PQC) to Origin](https://techdocs.akamai.com/property-mgr/docs/pqc-origin.md) * [Predictive Content Delivery](https://techdocs.akamai.com/property-mgr/docs/predictive-content-delivery.md) * [Predictive Prefetching](https://techdocs.akamai.com/property-mgr/docs/predictive-prefetching.md) * [Prefetch Objects](https://techdocs.akamai.com/property-mgr/docs/prefetching.md) * [Prefetchable Objects](https://techdocs.akamai.com/property-mgr/docs/prefetchable-objects.md) * [Protocol Downgrade (HTTPS Downgrade to Origin)](https://techdocs.akamai.com/property-mgr/docs/protocol-downgrade-https-downgrade-origin.md) * [Protocol Downgrade (Legacy)](https://techdocs.akamai.com/property-mgr/docs/protocol-downgrade-legacy.md) * [Query Authorization](https://techdocs.akamai.com/property-mgr/docs/query-authz.md) * [QUIC Support](https://techdocs.akamai.com/property-mgr/docs/quic-support.md) * [Quick Retry](https://techdocs.akamai.com/property-mgr/docs/quick-retry.md) * [Random Seek](https://techdocs.akamai.com/property-mgr/docs/random-seek.md) * [Read Timeout](https://techdocs.akamai.com/property-mgr/docs/read-timeout.md) * [Real-time Reporting](https://techdocs.akamai.com/property-mgr/docs/rt-rpt.md) * [Redirect](https://techdocs.akamai.com/property-mgr/docs/redirect-beh.md) * [Redirect Plus](https://techdocs.akamai.com/property-mgr/docs/redirect-plus.md) * [Referrer Checking](https://techdocs.akamai.com/property-mgr/docs/referrer-checking.md) * [Remove Outgoing Request Parameters](https://techdocs.akamai.com/property-mgr/docs/rm-outgoing-req-param.md) * [Remove Vary Header](https://techdocs.akamai.com/property-mgr/docs/rm-vary-header.md) * [Request Client Hints](https://techdocs.akamai.com/property-mgr/docs/request-client-hints.md) * [Request Control Cloudlet](https://techdocs.akamai.com/property-mgr/docs/req-control-cloudlet.md) * [Request Type Marker](https://techdocs.akamai.com/property-mgr/docs/req-type-marker.md) * [Resource Optimizer Extended Compatibility](https://techdocs.akamai.com/property-mgr/docs/resource-optimizer-extended-compat.md) * [Return Cache Status](https://techdocs.akamai.com/property-mgr/docs/return-cache-status.md) * [RMA Optimizations](https://techdocs.akamai.com/property-mgr/docs/rma-optimizations.md) * [Save POST DCA processing result](https://techdocs.akamai.com/property-mgr/docs/save-post-dca-processing-result.md) * [Scheduled Invalidation](https://techdocs.akamai.com/property-mgr/docs/scheduled-inval.md) * [Script Management](https://techdocs.akamai.com/property-mgr/docs/script-mgmt.md) * [Security Failover Protection](https://techdocs.akamai.com/property-mgr/docs/security-failover-prot.md) * [Segmented Media Delivery Mode](https://techdocs.akamai.com/property-mgr/docs/segmented-media-deliv-mode.md) * [Segmented Media Protection](https://techdocs.akamai.com/property-mgr/docs/segmented-media-prot-amd.md) * [Segmented Media Streaming - Prefetch](https://techdocs.akamai.com/property-mgr/docs/segmented-media-streaming-prefetch-amd.md) * [Set Response Code](https://techdocs.akamai.com/property-mgr/docs/set-response-code.md) * [Set Response Cookie](https://techdocs.akamai.com/property-mgr/docs/set-response-cookie.md) * [SHUTR](https://techdocs.akamai.com/property-mgr/docs/shutr-beh.md) * [Signature Header Authentication](https://techdocs.akamai.com/property-mgr/docs/signature-header-auth.md) * [Simulate Error Response Code](https://techdocs.akamai.com/property-mgr/docs/simulate-err-response-code.md) * [Site Failover](https://techdocs.akamai.com/property-mgr/docs/site-failover.md) * [Site Shield](https://techdocs.akamai.com/property-mgr/docs/siteshield-beh.md) * [Standard TLS Migration](https://techdocs.akamai.com/property-mgr/docs/standard-tls-migration.md) * [Standard TLS Migration Override](https://techdocs.akamai.com/property-mgr/docs/standard-tls-migration-override.md) * [Strict Header Parsing](https://techdocs.akamai.com/property-mgr/docs/strict-header-parsing.md) * [Subcustomer Enablement](https://techdocs.akamai.com/property-mgr/docs/subcustomer-enablement.md) * [SureRoute](https://techdocs.akamai.com/property-mgr/docs/sureroute-beh.md) * [TCP Optimizations](https://techdocs.akamai.com/property-mgr/docs/tcp-optimizations.md) * [Tiered Distribution](https://techdocs.akamai.com/property-mgr/docs/tiered-dist.md) * [Tiered Distribution Customization](https://techdocs.akamai.com/property-mgr/docs/tiered-distribution-customization.md) * [Tiered Distribution for API Acceleration](https://techdocs.akamai.com/property-mgr/docs/tiered-dist-api-accel.md) * [UID Configuration](https://techdocs.akamai.com/property-mgr/docs/uid-configuration.md) * [Validate Entity Tag (ETag)](https://techdocs.akamai.com/property-mgr/docs/val-entity-tag.md) * [Video Manager Powered by Cloudinary](https://techdocs.akamai.com/property-mgr/docs/video-manager-cloudinary.md) * [Visitor Prioritization Cloudlet](https://techdocs.akamai.com/property-mgr/docs/visitor-prioritization-cloudlet.md) * [Visitor Prioritization Powered by Queue-it](https://techdocs.akamai.com/property-mgr/docs/visitor-prioritization-queueit.md) * [Watermark Token](https://techdocs.akamai.com/property-mgr/docs/wmk-token.md) * [Watermarking](https://techdocs.akamai.com/property-mgr/docs/wmk-amd.md) * [Web Application Firewall](https://techdocs.akamai.com/property-mgr/docs/web-app-firewall.md) * [WebDAV](https://techdocs.akamai.com/property-mgr/docs/webdav-beh.md) * [WebSockets](https://techdocs.akamai.com/property-mgr/docs/websockets-support.md)